Rigaflex BBQ Dragon Monterey blau Aufbau- Und Bedienungsanleitung Seite 12

Assembly
Operation
1A Open the battery compartment on the bottom of the base device. Insert four AA batteries (do
not use rechargeable batteries) – BATTERIES NOT INCLUDED. Ensure that the batteries
are inserted correctly. Close the battery compartment.
1B Or use the USB port with a power bank (type C, 5V/0.15~0.24A)
2 Insert the inner shell into the base device.
3 Add charcoal to the charcoal container.
4 Add ignition paste to the ignition plate. Place the ignition plate on the inner shell.
4.1 Lighter cubes can also be mixed in with the charcoal and lit, instead of using ignition paste.
5 Turn the knob clockwise to the maximum level.
6 Light the ignition paste with a match. IMPORTANT: Ensure that the ventilation openings are
clear.
7 Place the charcoal container on the ignition plate. The charcoal will start to smolder after a
short time.
8 Place the grill on top of the inner shell. Ensure the four metal feet are inserted into the slots
on the inner shell. Align the metal eyes on the side of the grill to the bars on the base.
9 Hook the bars into the metal eyes and pull them down to lock the device. The grill is now
secured and assembled.
10 You can use the grill after approx. 10 minutes. Use the knob to adjust the heat.