Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Notes - Westfalia 96 68 37 Originalanleitung

Akku-schraubendreher 3,6 v x-grip 2
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 6
Please note the included General Safety Notes and the
following safety notes to avoid malfunctions, demage or
physical injury.
Please also observe the safety notes in the
manuals
for battery and charger.
 Please read this manual carefully and use the unit only
according to this manual.
 When using the tool, use safety equipment including safety glasses and ear
protection. If operating the tool causes discomfort in any way, stop
immediately and review your method of use.
 Dispose of used packaging material carefully or store it out of the reach of
children. There is a danger of suffocation!
 Persons with limited physical, sensorial or mental abilities are not allowed to
use the unit, unless they are supervised and briefed for their safety by a
qualified person.
 Battery chargers are for indoors use only. Ensure that the power supply and
charger are protected against moisture at all times.
 Use metal and voltage detectors to locate concealed electric, water or gas
lines. Avoid touching live components or conductors.
 Ensure that the lighting is adequate.
 Ensure that the drill bit is securely fixed in the chuck. Insecure drill bits can be
ejected from the machine causing a hazard.
 Ensure that the drill bit is in contact with the workpiece prior to starting up
the tool.
 Before drilling, check that there is sufficient clearance for the drill bit under
the workpiece.
 Do not exert pressure on to the tool. To do so would shorten its lifetime.
 Drill bits get hot during operation; allow cooling prior to handling them.
 Never use your hands to remove sawdust, chips or waste close by the bit.
 If you are interrupted when operating the cordless drill, complete the process
and switch off before looking up.
 If possible, use clamps or a vice to hold your work.
 Examine the chuck regularly for signs of wear or damage. Have damaged parts
repaired by a qualified service centre.
 Always wait until the cordless drill has come to a complete stop before putting
it down.

SAFETY NOTES

9

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis