Velleman ED2A009 Bedienungsanleitung Seite 4

4. Setting/operation
Refer to the illustrations on page 2 of this manual
• Use the mode button [2] to scroll between the available modes.
Note: holding down the 'clear' button will increase setting speed.
pedometer
calorie
distance
time
stopwatch
Note: to avoid inaccuracy in calculation due to shaking, the
pedometer will only start displaying after 5 consecutive steps.
5. Batteries
WARNING: handle batteries with care, observe
warnings on battery casing. Dispose of batteries in
accordance with local regulations.
Keep batteries away from children.
04/03/2009
ED2A009 (SHE13)
The display [1] shows the number of walked steps.
To clear, press and hold 'clear' [5] for ±2s.
The display [1] shows the used calories.
To set the users' weight, press and hold 'set' [4] for
±2s. Press 'clear' [5] to set the value. Press 'set'
[4] again to confirm.
To clear, press and hold 'clear' [5] for ±2s.
The display [1] shows the walked distance in km or
mi. To switch between km and mi, press and hold
'clear' [5] for ±7s.
To set step length, press and hold 'set' [4] for ±2s.
Press 'clear' [5] to set the value. Press 'set' [4]
again to confirm.
To clear, press and hold 'clear' [5] for ±2s.
The display [1] shows the time. To switch between
12/24h settings, press 'clear' [5].
To set the time, press and hold 'set' [4] for ±2s.
Press 'clear' [5] to increase the hour. Press 'set' [4]
to confirm. Press 'clear' [5] to increase the minutes.
Press 'set' [4] to confirm.
The display [1] shows a stopwatch.
Press 'start/stop' [3] to start or stop the stopwatch.
To clear, press and hold 'clear' [5] for ±2s.
4 ©Velleman Components nv
®