Mc Haus Artic-30 Bedienungsanleitung Seite 56

INSTRUCTIONS TUYA SMART APP
Download the Tuya Smart Life APP software
Register in the APP
The product turns on and enters standby mode. If it enters the on state after power on, it is
necessary to press the standby button for the device to enter standby mode).
In standby mode, press and hold the mode button for 5 seconds, the buzzer will beep once,
wait for a while until the WIFI light flashes quickly and enter the setup state, if the WIFI light is
not on, press the mode button for 5 seconds until the WIFI light flashes quickly. After powering
on the board, it will automatically enter into pairing mode.
After the WIFI light flashes rapidly follow these steps:
- choose to add a device in the APP, select the appliance in the device bar, and then select
the model inside.
- perform the WIFI pairing according to the prompts. After the pairing is successful, the WIFI
light is always on; if the pairing is not successful, then repeat the above steps.
After the setup is successful, you can use the APP to operate the product.
If the product changes network environment, you will need to reconfigure the product (see
steps 3, 4 and 5).
For the successfully configured product, click on the top right corner of the APP and select
"Share device" to share with the rest of the family (prerequisite: all family members must be
registered).
110
Tuya
Smart
Manual revisado en enero de 2023
111