Troubleshooting; Safety Notices; Fault Indications - Caso Germany Gastro 3500 Eco Original Bedienungsanleitung

17 Troubleshooting

This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:

17.1 Safety notices

CAUTION
► Only qualified electricians, who have been trained by the manufacturer, may carry out
any repairs on electrical equipment.
► Improperly performed repairs can cause considerable dangers for the user and
damages to the device.

17.2 Fault indications

In the event of a fault, an error code will appear in the display; it describes the cause of the
fault.
Error Code
E0, E5, E6
E1
E2, E7
E3
E4
► If error messages continue to be displayed after an extended waiting period or after
restarting the appliance, then it must be sent to Customer Service to be examined.
Caso Gastro 3500 Eco
Cause
Short circuit
Unsuitable Cookware
Overheat protection
Supply voltage too high
(> 270 V)
Supply voltage too low
(< 160 V)
Please note
Solution
Please send the device to
customer service.
Please check the cookware.
Remove the cookware and
allow the device to cool
down. Then turn the device
off and on again.
Ensure that the supply
voltage matches the voltage
shown on the type plate of
the device.
Ensure that the supply
voltage matches the voltage
shown on the type plate of
the device.
46