Klarstein BAROSSA 29 UNO Bedienungsanleitung Seite 36

EN
36
Setting the temperature
The appliance has two temperature zones. For each zone, the temperature range
can be set between 5 °C and 18 °C (40 °F and 65 ° F).
Note: The temperature selected for the lower zone must always be higher than
that of the upper zone. For optimal performance, the difference between the
two zones should be at least 4 °C.
How to use your appliance
• Press and hold the LIGHT + ZONE SELECT buttons simultaneously to switch
the unit on or off.
• Press and hold the LIGHT button for 5 seconds to switch between the display
in °C or °F.
Setting the individual temperature zones
The temperature of the upper zone and the lower zone must be set individually.
• Press the ZONE SELECT button to select the zone for which you want to
set the temperature. The display for the upper and lower zone shows the
temperatures in degrees.
• Press the ZONE SELECT button once, the display for the upper zone will start
to flash. Press the UP and DOWN buttons to set the temperature.
• Press the ZONE SELECT button again, the display for the lower zone will start
to flash. Press the UP and DOWN buttons to set the temperature.
• Press the LIGHT button to switch the light on or off.
Notes on the display indications
The appliance is designed to display the set temperature. To display the current
temperature, press the UP button for 5 seconds. After another 5 seconds, the set
temperature is displayed again.
If the display flashes, it means that the temperature in the zone differs by
more than 5°C from the set temperature. The flashing display ensures that the
temperature does not rise or fall unnoticed, possibly affecting the quality of the
wine.