Lumbar Support - Haider Bioswing 670 iQ Bedienungsanleitung

Lumbar Support

8
With the individually adjustable lumbar support you can adapt the curvature
in the area of the lumbar lordosis. Adjust the curvature roughly at the height
of the belt so that your lumbar spine receivers optimal support.
Adjustment of Lumbar Support to Shape of Back
Turning the rotary control on the outer side of the backrest clockwise in-
8
creases the curvature of the spine. Meanwhile, turning the rotary control
counterclockwise reduces the curvature of the spine.
Adjustment of Lumbar Support to Height
The height of the lumbar support can be adjusted by moving the rotary con-
trol located on the outer side of the backrest upward or downward into
8
one of the holes on the elongated guide.
8
english | 28
TrainBackMatic (Synchronous Mechanism)
The TrainBackMatic responds to the backrest pressure and automatically syn-
chronizes seat and backrest for a physically beneficial motion sequence. Try
to adjust the backrest pressure level so that you never feel to have to apply
too much force to lean back. In this way, you motivate yourself to change your
sitting position frequently; thus, promoting positive lumbar effects.
8 Adjustment of Backrest Tilt: Individually or with Permanent Contact
While sitting, pull the operating element
your movements. As soon as you release the lever, the backrest is fixed. You
can activate the permanent-contact mechanism by pulling the operating el-
ement upward and subsequently pushing it backward.
9a
Individually Adapted Back Pressure
While sitting, pull the operating element
ward so that you can adjust the back of the seat`s tilt. Turn the hand wheel
, which is located in the middle under the seat surface, clockwise to in-
9b
crease the back pressure. Meanwhile, turning the hand wheel counterclock-
wise decreases the back pressure.
upward. The backrest follows
9a
upward and then push back-
9a
9a
9b
english | 29
9