Panasonic TX-55MZ800E Bedienungsanleitung Seite 22

Dolby Vision Notification: Set your notification
appearance preference for Dolby Vision content.
When turned on, Dolby Vision logo will be dis-
played on the screen when Dolby Vision content
is detected.
DNR: Dynamic Noise Reduction (DNR) is the
process of removing noise from digital or analogue
signals. Set your DNR preference as Low, Medi-
um, Strong, Auto or turn it off by setting as Off.
MPEG NR: MPEG Noise Reduction cleans up
block noise around outlines and noise on the back-
ground. Set your MPEG NR preference as Low,
Medium, Strong or turn it off by setting as Off.
Max Vivid: Manipulates contrast and colour
perception, basically converts Standard Dynamic
Range picture to High Dynamic Range picture. Set
as On to enable.
Adaptive Luma Control: Adaptive Luma control
adjusts contrast settings globally according to
content histogram in order to provide deeper black
and brighter white perception. Set your Adaptive
Luma Control preference as Low, Medium,
Strong or turn it off by setting as Off.
Local Contrast Control: Local contrast control
divides each frame to defined small regions and
provides ability to apply independent contrast set-
ting for each region. This algorithm improves fine
details and provides better contrast perception.
It makes higher depth impression by enhancing
dark and bright areas without any detail loss. Set
your Local Contrast Control preference as Low,
Medium, High or turn it off by setting as Off.
Filmmaker Mode: Filmmaker mode and Auto
switch options will be available. To enable or
disable an option, highlight and press OK.
Flesh Tone: Adjusts the skin tone brightness.
Set your preference as Low, Medium, or High
to enable. Set as Off to disable.
DI Film Mode: It is the function for 3:2 or 2:2
cadence detection for 24 fps film content and
improves the side effects (like interlacing effect or
judder) which are caused by these pull down me-
thods. Set your DI Film Mode preference as Auto
or turn it off by setting as Off. This item will not be
available if Game Mode or PC Mode is turned on.
Blue Stretch: Human eye perceives cooler whites
as brighter white, Blue Stretch feature changes
White balance of mid-high grey levels to cooler
colour temperature. Turn the Blue Stretch function
on or off.
Gamma: Set your gamma preference. Dark, Mid-
dle, and Bright options will be available.
Game Mode: Game mode is the mode which cuts
down some of the picture processing algorithms
to keep up with video games that have fast frame
rates. Turn the Game Mode function on or off.
Note: The game mode can not be used for Netflix and
YouTube. If you want to use the game mode for Multi
Media Player or HDMI source, you need to set the MJC
option to Off.
ALLM: ALLM (Auto Low Latency Mode) function
allows the TV to activate or deactivate low latency
settings depending on playback content. Highlight
this option and press OK to turn the ALLM function
on or off.
PC Mode: PC Mode is the mode which cuts down
some of the picture processing algorithms to keep
signal type as it is. It can be usable especially for
RGB inputs. Turn the PC Mode function on or off.
De-Contour: Decreases the contour effects in
low-resolution content and auto streaming servi-
ces. Set your preference as Low, Middle, or High
to enable. Set as Off to disable.
MJC: Optimises the TV's video settings for
motional images to acquire a better quality and
readability. Highlight this option and press OK to
see available options. Effect, Demo Partition,
and Demo options will be available. Set the
Effect option to Low, Middle, or High to enable
the MJC function. Highlight Demo Partition and
press OK to set your preference. All, Right and
Left options will be available. Highlight Demo and
press OK to activate the demo mode. While the
demo mode is active, the screen will be divided
into two sections, one displaying the MJC activity,
the other displaying the normal settings for the TV
screen. If the Demo Partition option is set to All,
both sides will display the MJC activity.
HDMI RGB Range: This setting should be ad-
justed according to input RGB signal range on
HDMI source. It can be limited range (16-235)
or full range (0-255). Set your HDMI RGB range
preference. Auto, Full and Limit options will be
available. This item will not be available, if the
input source is not set as HDMI.
Low Blue Light: Electronic device screens emit
blue light that can cause eye strain and may lead
to eye problems over time. To reduce the effect
of blue light set your preference as Low, Middle,
or High. Set as Off to disable.
Colour Space: You can use this option to set the
range of colours displayed on your TV screen.
When set as On, colours are set according to the
source signal. When set as Auto, the TV decides
to set this function as on or off dynamically, accor-
ding to source signal type. When set as Off, the
TV's maximum colour capacity is used by default.
Automatic Playback Optimisation: Turn the
automatic playback optimisation feature on or off.
English - 21 -