Herunterladen Inhalt Inhalt Diese Seite drucken

Hazards Situations; Transport - Zipper ZI-HAEK15000 Betriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Never operate or refuel a gasoline or diesel engine in a sealed area without adequate ventilation.
Carbon monoxide exhaust fumes from the internal combustion engine drive units can cause
health hazards and death by inhalation in confined spaces. Therefore, operate the machine only
in well-ventilated areas or outdoors.
Liquid fuels can cause severe damage to the skin and the environment.
12.7.2

Hazards situations

Due to the structure and construction of the machine, hazardous situations may occur which are identified
in these operating instructions as follows:
A safety instruction designed in this way indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
A safety instruction designed in this way indicates a potentially hazardous situation which,
if not avoided, could result in death or serious injury.
A safety instruction designed in this way indicates a possibly hazardous situation which, if
not avoided, may result in minor or moderate injury.
A safety notice designed in this way indicates a potentially hazardous situation which, if
not avoided, may result in property damage.
Regardless of all safety regulations, your common sense and your appropriate technical aptitude/training
are and remain the most important safety factor in the error-free operation of the machine. Safe working
depends on you!!
13

TRANSPORT

Transport the machine in its packaging to the place of installation. To manoeuvre the machine in the pack-
aging, a pallet truck or forklift truck with the appropriate lifting force (the fork must have a length of at least
1200 mm) can be used, for example.
For proper transport, also observe the instructions and information on the transport packaging regarding
centre of gravity, lifting points, weight, means of transport to be used as well as the prescribed transport
position etc. Ensure that the selected lifting equipment (crane, forklift, pallet truck, load sling, etc.) is in per-
fect condition.
Lifting and transporting the machine may only be carried out by qualified personnel with appropriate train-
ing for the lifting equipment used.
Risk of injury from suspended or unsecured load!
Damaged or insufficiently strong hoists and load slings can result in serious injury or even
death.
 Before use, therefore, check hoists and load slings for adequate load-bearing capacity
and perfect condition. Secure the loads carefully. Never stand under suspended loads!
Transport after assembly with a towing vehicle.
Check that the towing vehicle meets the necessary requirements for carrying loads of this type and weight.
Ensure that the appropriate coupling is available and that the safety instructions are observed.
Transportation on public roads is not permitted.
Before transportation, check that the machine is correctly and securely fixed to the towing vehi-
cle and that the safety chains are in place. Leave some slack in the chains to allow turning.
Do not allow anyone to sit or to travel on the machine and do not take any passengers with you.
Never transport cargo or wood with the machine.
Be careful when reversing. You can easily tilt your machine over.
Adjust the towing speed to the area and the conditions. Never exceed 50 km/h when towing.
ZIPPER MASCHINEN GmbH
WAR N I N G
C AU TI O N
WAR N I N G
www.Zipper-Maschinen.at
D AN G E R
N O TE
TRANSPORT
32
ZI-HAEK15000

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis