Inhaltsverzeichnis
Werbung
Preface
This user manual describes design, installation, commissioning and maintenance of HiBoost consumer mobile signal
boosters. Please read user manual carefully before installing and maintaining the boosters. The information in this
manual is a subject to change without prior notice.
Booster Model
The user manual can be used for the following models: Hi10-EGSM, Hi10-3S-IOT (Hi10-EDW-IOT), Hi13-LTE800,
Hi13-EGSM, Hi13-DCS, Hi13-ENR700, Hi13-EW, Hi13-ED, Hi13-3S-IOT (Hi13-EDW-IOT), Hi13-3SL-IOT, Hi13-5S-IOT,
Hi17-EW, Hi17-3S-IOT(Hi17-EDW-IOT), Hi17-3SL-IOT, Hi17-5S-IOT, Hi13-EL800, Hi17-EL800, Hi23-ENR700.
Note:The users of repeaters should get permission from the mobile providers for the use and installation of the repeater.
Glossary of Terms
Item
Definition
700MHz
Available on LTE/NR700(703~733MHz/758~788MHz) network
800MHz
Available on LTE800(832~862MHz/791~821MHz) network
Available on EGSM900(880~890MHz/925-935MHz) and PGSM900
900MHz
(890~915MHz/935~960MHz) , WCDMA/UMTS900(880~915MHz/925~960MHz) networks
1800MHz
Available on GSM/LTE1800(1710~ 1785MHz/1805-1880MHz) networks
2100MHz
Available on 3G(WCDMA/UMTS2100)(1920-1980MHz/2110-2170MHz) networks
2600MHz
Available on LTE2600(2500-2570MHz/2620~2690MHz) network
RF
Radio Frequency
ATT
Attenuation
ALC
Automatic Level Control
AGC
Automatic Gain Control
MGC
Manual Gain Control
dB
Decibel
dBm
Decibels relative to 1 mill watt
UL
Uplink
DL
Downlink
Hz
Hertz
MHZ
Megahertz
NF
Noise Figure
RSSI
Received Signal Strength Indicator
Safety Warnings
Users must follow the principles stated below:
The booster should follow system requirements of mobile signal enhancement, assure good grounding and lightning
protection.
Booster's power supply voltage should meet the standards of security requirements;
Any operation should be carried out only after cutting off power in advance. Only the professional user is authorized
for the operation.
Do not dismantle the machine, maintain or displace accessories by yourself. In this way, the equipment can be
damaged and you can even get an electric shock.
Do not open the booster, touch the module of booster, or open the cover of module to touch the electronic
component. The components will be damaged due to electrostatic.
Keep away from heating equipment, because the booster will dissipate heat during working. And do not cover
booster with anything that influences heat-dissipation.
The device has a plug connection, the socket must be close to the device and accessible.
During the transportation and storage process, the device should avoid the humid environment, prevent violent
impact and avoid strong vibration.
Operating Temperature range is -10 - +55 degrees Celsius.
The Body Separation distance is 50cm by using the procedure of MPE calculation.
3
Werbung
Inhaltsverzeichnis
