Sonus Faber ARENA Bedienungsanleitung Seite 6

Note: Please refer to the Arena manual for the remaining chapters.
4. INSTALLATION (Arena 10 frame)
4.1 - PACKAGING CONTENTS
• Frame
• Cut Out template
• Accessory box: screws, screw caps.
4.3 - ASSEMBLY
4.3.1 - REMOVE THE TWO BRACKETS PROVIDED
EN
4.3.2 - SCREW THE OUTER FRAME TO THE SPEAKER
4.3.3 – MARK THE CUTTING AREA ON THE WALL USING THE TEMPLATE PROVIDED.
CUT ALONG THE MARKED PERIMETER
Previously, make sure that the cutting area is
between the two uprights. For correct operation
of the fixing system, maintain a distance of at
least 4 cm between the lateral edge of the hole
and the nearest upright.
6