Essentials RGBW 150 Bedienungsanleitung Seite 13

controller box
3. App configuration will be completed as shown in Fig. 1. Success-
ful configuration will appear as shown in Fig. 2. Names of devices
that have been configured successfully can be changed, and the
locations of the rooms where the corresponding devices are can
be selected.
Auto Scan
1. Turn on the power, long press the button "L" on the control box
until the wifi indicator light change to 'Red/Quick Flash'.
2. Click "Auto Scan" at the top right corner of the App page, App
will start to scan the devices.
Hinweis: The device is only compatible with 2.4 Ghz networks.
Figure 1 Figure 2
3