Configuration Of The Device Server - Exsys Ex-6131 Anleitung

EX-6131

5. Configuration of the Device Server

Factory Settings:
The EX-6131 is delivered with the following factory settings:
Login User Name:
Network Operation Mode:
If you want to reset the EX-6131 to "Factory Settings", then press and hold the reset button for
approx. 3-5 seconds. The status LED goes out and starts flashing again a few seconds later.
Please note that the settings after the reset are not identical to the factory settings! When you have
reset the EX-6131 to "Factory Settings", you will have the following settings in the device:
Network Operation Mode:
© Copyright 2021 by EXSYS Vertriebs GmbH. All Rights Reserved
Password:
IP Address:
Serial Interface:
Login User Name:
Password:
IP Address:
Serial Interface:
admin
system
DHCP (Assigned Automatically)
VCOM Mode
Port 1: RS-232 / Port 2: RS-485 2-wire
admin
system
Static 192.168.2.1
TCP Server Mode
Port 1: RS-232 / Port 2: RS-422
19
English