Herunterladen Inhalt Inhalt Diese Seite drucken

Beko WTE10744XDOS1 Bedienungsanleitung Seite 22

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

4.3.8.2 Functions/Programmes Selected by Pressing the Function Keys for Three Seconds
• Drum Clean
To select this programme, press and hold the auxiliary function button 1 for 3 seconds. Use it regularly (every
1-2 months) to clean the drum and ensure the required hygiene is provided. Steam is applied before the
programme to soften the residues in the drum. Run the programme while the machine is totally empty. For
better results, put powder lime-scale remover for washing machines into the detergent compartment no. "2".
When the programme is over, leave the loading door ajar so that the inside of the machine gets dry.
C
This is not a washing programme. It is a maintenance programme.
Do not run this programme when there are any objects in the machine. If you try to do so, the machine will automatically
detect that there is load inside and abort the programme.
• Anti-Crease+
If you press and hold the spin selection button for 3 seconds, this function will be selected and the programme
follow-up light of the relevant programme will turn on. When this function is selected, the drum will rotate for up to
eight hours to ensure that the clothes do not crease at the end of the programme. At any time during these eight
hours, you can cancel the programme and unload the machine. Press the function selection key or the machine
on/off key to cancel the function. The programme follow-up light will remain on until the function is cancelled or
the step is complete. If the function is not cancelled, it will also be enabled in the next washing cycles.
• Softener Selection
Press and hold the Auxiliary Function (Automatic Dosing) button 2 for 3 seconds to select this function. If you
select this function while the softener symbol is active on the display, softener will become off. If you select
this function while the softener symbol is inactive on the display, softener will become on.
• Child lock
You can use the Child Lock to prevent children from tampering with the machine. Thus you can avoid any
changes in a running programme.
C
When the Child Lock is enabled, you can press the On/Off button to switch the machine on or off. Programme resumes
when you start the machine again.
You will hear a warning if the buttons are pressed while Child Lock is enabled. This audible warning will be canceled if the
buttons are pressed five times consecutively.
To enable Child Lock:
Press and hold the auxiliary function button 3 for 3 seconds. Once the countdown "3-2-1" is
completed on the display, the child lock symbol will turn on. When this warning is displayed, you can release
the Auxiliary Function button 3.
To disable Child Lock:
Press and hold the auxiliary function button 3 for 3 seconds. Once the countdown "3-2-1" is
completed on the display, the child lock symbol will turn off.
• Bluetooth
You can use the Bluetooth connection function to pair your machine with your smart device. This way, you can use your smart
device to get information about your machine and control it.
To enable Bluetooth:
Press and hold the Remote Control function button for 3 seconds. You will see the countdown "3-2-1"
and the Bluetooth symbol will turn on. Release the Remote Control function button. The Bluetooth icon will
flash while the product is being paired with the smart device. If the connection is successful, the light of the
icon will remain on.
22 / EN
Washing Machine / User's Manual

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis