Connecting The Camera - Chacon IPCAM-FI01 Bedienungsanleitung

2. CONNECTING THE CAMERA

A. Download the application
Search and download the free "Chacon cam+" application in Apple Store or
Android app store:
B. Start to use the application
Launch the application and create your account:
1. When running the app for the first time, a notification will appear to get
permission for the phone. For better using experience, it is recommended that
you allow the app to obtain the following permission.
Note: Allow Chacon Cam+ to get system push message permissions (Function:
When the camera triggers motion detection or audible alarm, the phone can
receive alarm push).
2. Click on "Sign Up" to create your account and follow the instruction.
Note: By registering your email address and clicking on "Get the verification code"
you will receive the code to your email address which is necessary to validate your
account.
C. Add the camera
Link the camera to the "Chacon cam+" application:
1. Connect the camera to the mains, making sure to push the cable home (It is
recommended to use the supplied adapter).
2. After the device is successfully powered on, the normal indicator will turn
flashing red (twice a second). After a few seconds, you will hear a beep. This
indicates that the camera can be connected to Wi-Fi via your smartphone or
tablet.
Note1: If the indicator status is abnormal, please reset the device to factory
settings. (Press and hold RESET button until you hear the "beep") (The reset button
position of each product is different, but they are all marked with "RESET").
Note2: A stable and smooth WIFI network is required when adding devices, please
bring the device as close as possible to the WIFI router.
All manuals and user guides at all-guides.com
4