Product Description; Important User Information - Retevis EHN007 Bedienungsanleitung

Product Description

【Function 1】 EHN007 Earmuffs with Bluetooth Technology lets you seamlessly stream entertainment from your
mobile phone and any other Bluetooth-enabled device. An integrated microphone lets you make and take phone
calls without removing the ear protection.
【Function 2】 The built-in stereo microphones allow detection of the direction of ambient sounds, enhancing
communication abilities and awareness of surrounding sounds such as voices, machines, and warning signals to
a safe level yet it provides good hearing protection.
【Function 3】 The earmuffs can also actively listen to the surrounding sound.When
the ambient sound is lower than 82db, the sound will continue to be amplified to 82db; when the ambient sound
exceeds 82db, it will automatically attenuate the sound exceeding 82db, and it will be reduced to 82db to protect
hearing.

IMPORTANT USER INFORMATION

1.Extend the headband before use. Place the ear cups over each ear, and make sure the microphone is in the
forward position to obtain the optimal listening condition.
2.Adjust the headband by sliding the headband up or down to get a suitable position.
3.The ear cushions should seamlessly cover the ears and firmly against the cheeks. For optimal effect, please
remove all hair under the cushion. And the noise attenuation effect will be adversely affected by anything that
impairs the seals of the earmuff cushions against the cheeks, such as thick spectacle frames, hats, etc.
HOW TO OPERATE THE 【Function 1】
1.Bluetooth On/off.
Press and hold the "⑤ Bluetooth on/off Switch" for 3 seconds and a tone "Power on" is advised, then the
Bluetooth function is turned on. The indicator light is red (on for 1 second) likewise, press and hold the "
⑤ Bluetooth on/off Switch" for 3 seconds to turn off the Bluetooth function, and a tone "Power off" is advised.
2.Pairing status and empty paired list.
Press and hold the "⑤ Bluetooth on/off Switch" for 6 seconds while in the off state, or press and hold the"③
Play/Pause/Answer a Call Button" for 3 seconds to disconnect when connected, the earmuff will be in the pairing
status, and the Bluetooth indicator flashes blue every 10 seconds; when the earmuff is in the pairing state, it can
be detected and paired by other devices such as mobile phones, the name of the earmuff shown on the other
device is: "RETEVIS_EHN007", and the successfully paired devices will be saved in the list. In the Bluetooth
disconnected state, press and hold the "⑥ Volume (-) Button" and "④ Volume (+) Button" for 5 seconds at the
same time, which will clear the paired list.
3.Disconnected State and Connected State.
When the earmuff is disconnected to Bluetooth (the indicator flashes red and blue rapidly), if there is a device in
the pairing list, the headset will actively connect to the device when power is on again. The indicator light flashes
blue every 10 seconds after the headset is connected to the device or while it is working.
4.Call function and Control.
When the earmuff is connected to Bluetooth, double-click the"③ Play/Pause/Answer a Call Button" to re-dial the
last dialed number; When the earmuff is in the outgoing call, click the "③ Play/Pause/Answer a Call Button" to
cancel the external pullout; When the earmuff is ringing, click the "③ Play/Pause/Answer a Call Button" to
answer the call, and press and hold the"③ Play/Pause/Answer a Call Button" to reject the call. When the earmuff
is in a call, click the"③ Play/Pause/Answer a Call Button" to cancel the current call, and double-click the"③
Play/Pause/Answer a Call Button" to switch between "Use the phone to talk" and "Talk with the headset", and
click the "④ Volume (+)/⑥ Volume (-) Button" to increase/decrease the call volume.
5.Play Music and Control.
When the earmuff is connected, click the"③ Play/Pause/Answer a Call Button" to play music. During play status,
click the"③ Play/Pause/Answer a Call Button" to pause:
02