Installation Of The Driver - RaidSonic Icy Box IB-DK2262AC Handbuch

Installation of the driver!

Caution: Do not connect the DockingStation to your computer before installing the driver from the
download area of: https://www.displaylink.com/downloads
Windows :
®
A. Download the correct driver from webpage above
B. Click on "Run Setup.exe"
C. Follow the instructions and finish the driver installation
D. Connect the DockingStation to a supported USB Type-C
or USB 3.0 Type-A port on the PC
E. Restart the PC
F. The IB-DK2262AC is ready to be used
macOS :
®
A. Download the correct driver from the webpage above
B.
Run the file Mac_driver\ driver.dmg by double-click
C. Follow the instructions and finish the driver installation
D. Connect the DockingStation to a supported USB Type-C
or USB 3.0 Type-A port on the macOS
E. Restart the computer
F.
The IB-DK2262AC is ready to be used
Chrome OS :
®
The DisplayLink drivers are pre-installed under Chrome OS
®
Starting up
1. Plug in the power supply
2. Connect the USB Type-C
and your computer.
3. Connect your devices to the appropriate interfaces on the dock
Manual IB-DK2262AC
to Type-C (Type-A) cable between the DockingStation
® ®
®
®
computer
®
.
®