Blade Replacement - JBM 60045 Bedienungsanleitung

REF.60045
2/ To start the mower, insert the security key into the slot.
Next, push the power button and pull the bail lever towards
the handle.
3/ Start mowing.
4/ To stop the mower, release the bail lever.
5/ To empty the grass bag, take out the grass collector and
empty it.
Note: Do not overfull the grass collector.
TROUBLESHOOTING
Problem Cause
Battery is empty
Battery is defective
The motor does
not start
Contact key is not
inserted correctly
Blade is damaged
Unsteady
running, strong
vibrations Blade is loose
Blade is blunt
Battery is defective
Poor mowing/
catching
Collection bag is
performance
blocked
Mowing height is not
correct.
Blocked channel
Grass is not
Full collection bag
collected
Too wet grass
MAINTENANCE
Keep all the screws tight to be sure the
equipment is in safe working condition.
Check periodically the condition of the
collection bag.
Use only original accessories and original
spare parts. Using other spare parts can
result in injuries of the user.

Blade replacement

DANGER! Remove batteries prior to maintenance work or
removing the blade.
Wait until all rotating parts have stopped and the appliance
has cooled down.
· 9 ·
Action
Charge the battery
Contact customer
service
Insert the key correctly
Replace the blade.
Screw the blade very
tight.
Have the blade
sharpened or replaced
Contact customer
service
Empty the collection
bag
Adjust the mowing
height
Clean the ejection
channel
Empty the collection
bag
Cut in dry weather