Product Maintenance; Continuous Outflow; Product Storage - Noaton DF 4112 Bedienungsanleitung

• Use only the recommended type of power supply.
• Do not attempt to repair or rebuild the equipment yourself.
• Use the product only on dry and stable surfaces.
• Before using the product, check that the power cord is in good condition and that they are properly connected.
• Do not place any objects on the product or on the power cord.
• Do not use the product if it is damaged or not working properly. If the product is damaged, stop it immediately and request a
repair.
• Always disconnect the power cord before cleaning or servicing the product.
• Do not use accessories or spare parts that are not recommended by the manufacturer.
• Exercise extra caution when using the product and be careful with children or animals.
•
Use the product only in accordance with local regulations and standards.
•
This appliance is not intended for use by persons (children) with reduced physical or sensory abilities or lack of experience,
unless they have been given safety instructions on how to operate the appliance or are working under the supervision of a
person responsible for their safety. Children must be supervised by an adult and should not handle the apparatus.

Product maintenance

• Always disconnect the power cord before cleaning or servicing the product.
• Use only a dry cloth or soft cloth to clean the surface of the product. Do not use aggressive cleaners or abrasive cleaners.
• Do not use a damaged product or a product with a damaged power cord or batteries.
• Before storing the product for a long time, clean it, dry it and disconnect the power cord.
• Before using the product after a long period of storage, make sure that it is in good condition and that it functions properly.
• Clean the filter regularly (twice a month), otherwise the performance of the device will be reduced.
If the device is not used for a long period of time, proceed as follows:
1. Empty the water tank, wipe the inside of the water tank and put it back in.
2. Clean the filter.
3.
Place the unit in a horizontal position and avoid direct sunlight.

Continuous outflow

The water can be continuously drained using a PVC hose. (PVC hose is not
included - the inner diameter is 12 mm.)
1. Remove the water tank and insert the PVC hose into the drain hole
before draining the water continuously. Then put the water tank
back in.
2. Place the PVC hose lower than the drain hole to allow water to flow
out.During dehumidification, the condensation water can be drained
into a water tank. When the water tank is full of water, the unit
stops working and the indication lights up. Pour out the water:

Remove the water tank according to and pour out the water.

Put the water tank back in.

Press the POWER button to turn the unit on.

Product storage

• Before storing the product, clean it and disconnect the power cord.
• Store the product in a dry and cool environment.
• Do not place any objects on the product or on the power cord.
• Make sure that the product is sealed and that it is protected from dust or other contaminants.
•
Store the product out of reach of children and
animals.
14
EN