Cisco Systems Linksys AG041 Kurzanleitung Seite 3

D
If you are connecting more
than four PCs to the Gateway,
you will also need to connect
a hub or switch to the
Gateway.
NOTE: If your PC's Ethernet
adapter is not set up,
refer to the Ethernet
adapter's user guide for
more information.
E
Connect the power adapter to
the Gateway. Connect the
power adapter to the electrical
outlet.
F
Turn on the Gateway. Then,
turn on the first PC that you
want to use to configure the
Gateway.
Proceed to Step 2: Configure the
ADSL Gateway.
Make sure you only
IMPORTANT:
place the microfilter or splitter
between the phone and the wall
jack and not between the Gateway
and the wall jack. Otherwise your
ADSL will not connect.
All manuals and user guides at all-guides.com
D
3