Westfalia 64 16 05 Originalanleitung Seite 15

 Before each use, make sure the sanding belt is free from damage and can
move freely. The edges of the belt should not be frayed and the seam must
be in good condition.
 The unit should be clean and there should be no parts missing.
 If you hear unusual sounds during operation or abnormal vibration occurs,
stop operating the unit and check the correct fit of the sanding belt and the
sanding arm. If the fault cannot be remedied, have the power file checked by
a professional.
Maintenance and Cleaning
 First unplug from power mains before cleaning or maintaining the unit.
 Regularly brush or wipe the dust off the unit. Please keep in mind that the
dust may be hazardous.
 For cleaning the housing use a moist cloth, or for harmless dust, a stiff brush.
 Do not immerse the machine in liquids of any kind and do not allow liquids to
enter the machine.
 The unit does not require further maintenance. Do not disassemble it and do
not attempt to repair it yourself. In the case of questions or problems, please
turn to our customer support department.
 Enclosed in delivery you will find a pair of carbon brushes. If the machine
works powerless and sparking occurs at the brushes, it may be a sign that the
carbon brushes are used up and have to be replaced. Have the carbon
brushes replaced by a professional only or return the unit to the Westfalia
customer support department. Do not open the housing of the power file. Do
not try to repair it yourself.
Sanding Belts
Sanding Belts are available under the below mentioned order numbers from
Westfalia:
Art. 65 12 16 Sanding Belt 8 mm, K 40, 5 Pieces
Art. 65 13 15 Sanding Belt 8 mm, K 80, 5 Pieces
Art. 65 14 06 Sanding Belt 8 mm, K 120, 5 Pieces
Art. 65 14 22 Sanding Belt 13 mm, K 40, 5 Pieces
Art. 65 14 63 Sanding Belt 13 mm, K 80, 5 Pieces
Art. 65 15 05 Sanding Belt 13 mm, K 120, 5 Pieces
15