Air Pressure and Air Volume
▪ Operate the air impact wrench with a pressure of 6.3 bar (90 psi) using
a compressor with an air suction capacity of at least 200 l/min. When
using higher pressure for operating the air tool than the max. allowable
pressure of 8 bar, its self-life will be reduced drastically. The ideal ca-
pacity is provided by compressors with a suction capacity of 300 – 400
l/min.
▪ Only use air hoses with an inner diameter of at least 9 mm. When
setting up the air pressure, always keep in mind that the pressure will
decrease approx. 0.6 bar when using a 10 m long hose with an inner
diameter of 9 mm.
Storing
Store the air impact wrench in a dust and dirt-free location, between 10° C
and 30° C.
Operation
20