Maintenance And Care; Lubrication - Westfalia 92 85 75 Originalanleitung

sure the socket correctly locates on the square drive firmly engaging
on the snap ring.
▪
Only use accessories specifically hardened and designed for use with
impact tolls. Do not use standard chrome type hand tool sockets and
accessories, as they may shatter and splinter.

Maintenance and Care

▪ To ensure proper functionality and a long lifetime, diligent lubrication
and maintenance is essential.
▪ For operating the pneumatic tool clean air is required. Corrosion
residues, dust and dirt from the pneumatic pipes reduce the efficiency
of the tool and will cause technical problems. An upstream mainte-
nance unit consisting of filter, pressure regulator valve and lubricating
equipment removes moisture and dirt from the air, controls the working
pressure and supplies the tool perfectly with lubricating oil.
▪ If necessary clean the air impact wrench with a moist cloth.
▪ Do not use abrasive or aggressive chemicals as benzene or thinner,
which may dissolve plastic parts.
▪ Do not allow liquids to enter the tool and never immerse it into liquids.
Water in the compressed air inlet can damage the machine. Therefore it
is recommended to drain the air lines and the compressor regularly!
Also clean the air filters on a regular basis.

Lubrication

Pneumatic tools always have to be lubricated sufficiently. This is done
continuously and safest by using an oil-fog lubricator.
1. Screw the mini oil-fog lubricator directly onto the
compressed air connection (5).
2. Fill the mini oil-fog lubricator with a few drops of
special compressed air oil. To do this, loosen
the crosshead screw on the mini oil-fog lubrica-
tor and drop oil into the filling opening by using
the oil bottle (13).
Check the oil level regularly and top up oil if
necessary.
Operation
19