Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SilverCrest SLR 30 B1
8.2.
Button functions
The functions of the buttons/indicators on the control panel (1) are shown in the table below
Button
8.3 Switching the
Insert the plug into an easily accessible socket. A beep will sound, and every indicator on the control
•
panel (1) as well as the LED ring light (12) will illuminate for a moment. The air purifier is now in
standby mode and the ON/standby button
To switch on the air purifier, briefly press the ON/standby button
•
activated buttons/functions will illuminate brightly, while the inactive buttons/functions will glow
faintly.
The air purifier will retain the settings that were previously selected when it is switched back on
provided that the air purifier was not disconnected from the mains in the meantime. To change the
settings of each function, press the corresponding button (2, 13, 14) once or multiple times.
To switch the air purifier to standby mode, briefly press the ON/standby button
•
beep will sound. The air purifier is now in standby mode and the ON/standby button
maintain a continuous, faint glow.
8.4 Activating/deactivating the
During operation, press the ion function button
•
8.5
Fan
functions
You can use the fan function button
button
(14) repeatedly until the desired setting is displayed.
'Auto': Automatically adjusts the fan speed and air flow rate to the current ambient air quality.
•
28 – English
Function
• ON/OFF (standby mode)
• Fan settings
'Auto' – 'High' – 'Low' – 'Sleep'
• Activate/deactivate the ion function
• Activate/deactivate the timer function
• Select operation length (hours): 1 h/ 2 h/ 4 h/ 8 h
• Button is illuminated: the filter (8) has been used up and must be
changed.
• Confirm the filter has been changed and reset the timer
air purifier
on/off
(14) to cycle through the fan's four settings. Press the fan function
(4) maintains a continuous, faint glow.
ion
function
(13) to activate or deactivate the function.
(4). A beep will sound, and the
(4) again. A
(4) will
Werbung
Inhaltsverzeichnis
Fehlerbehebung
