Silvercrest SLR 30 B1 Bedienungsanleitung Und Sicherheitshinweise Seite 26

SilverCrest SLR 30 B1
socket must continue to be easily accessible after the plug has been
connected.
Ensure that the connecting cable cannot be damaged by sharp
•
edges or hot surfaces.
When using the product, ensure that the connecting cable is not
•
pinched or crimped.
The product is also not fully disconnected from the mains once it
•
has been switched off. Remove the plug from the socket to fully
disconnect it from the mains. Always pull on the plug to remove it
from the socket; never pull on the cable (10).
Remove the plug from the socket
•
o if a fault occurs
o if you are not using
during assembly
o
when changing the filter
o
o before cleaning the product
o during thunderstorms
Do not attempt to repair the product yourself. In the event of a
•
defect, switch the product off, remove the plug from the socket and
contact our service department.
If this product's connecting cable is damaged, it must be replaced
•
by the manufacturer, their service department or a similarly
qualified person in order to prevent any hazards.
WARNING! Risk of injury!
Only use the original accessories provided by the manufacturer.
•
24 – English
the product