Installing Bewacom - Siemens Bewacom BM3 Bedienungshandbuch

BM3 Installation & User Manual

Installing Bewacom

Install the Bewacom at a height of 120–140 cm
(from the floor to the bottom edge of the Bewa-
com). To cater for disabled persons, a suitable
height is approximately 95 cm.
1 Open the Bewacom with the key supplied. The
lock is located on the front.
2 Fasten the back plate against the wall, using
three screws as shown in the illustration below.
Seal the screw and cable holes with sealant if
the unit is externally mounted.
9