Parkside PTUS 1 A1 Bedienungs- Und Sicherheitshinweise Seite 14

Red LED is fast flashing: The rechargeable battery needs to
charge.
Not any LED and sound effect response: the rechargeable
battery voltage is very low, it must be charged immediately.
Red LED is slow flashing: The rechargeable battery is in the
charging status.
Red LED is illuminated: The rechargeable battery is fully
charged.
Switch the frequency controller
the charging process to prevent disturbances from visual or
acoustic signals.
Remove the rubber plugs from the USB socket
Plug the USB charging cable
socket and connect the USB plug of the USB charging cable
10
to your computer with a USB port. Alternatively, you can use
11
a USB adapter, which can be bought from a retailer.
Depending on the current charging state of the battery, charg-
ing takes approx. 5–10 hours. During the charging process,
the charge indicator
When the rechargeable battery is fully charged, the charge
indicator
6
14 GB/IE/NI
flashes.
6
will illuminate.
to Programme "0" during
3
with USB-C plug into the USB
11
.
10