Operation; Selecting The Grind Setting - Silvercrest SKKM 200 A1 Bedienungsanleitung

8) If all of the coffee beans have been ground
before the end of the grinding process, stop it
by pressing the start/stop button
prevent the grinding mechanism from running
empty.
NOTE
► Before removing the coffee powder container
t, tap it lightly on the housing in front of the
output opening 7 to knock any coffee
powder residue into the coffee powder
container t.
9) Remove the coffee powder container t and
dispose of the ground coffee.
The appliance is now ready for use.

Operation

♦ Add a maximum of approx. 250 g of coffee
beans into the coffee bean container 2. The
lid 1 should still close. If necessary, shake the
appliance carefully so that the coffee beans are
evenly distributed in the coffee bean container 2.
ATTENTION! PROPERTY DAMAGE!
► After operating the appliance for 3 minutes,
allow it to cool down for at least 30 minutes.
NOTE
► It is best to always freshly grind your coffee
beans before use. Pre-ground coffee powder
loses its aroma quickly.
► You can stop the grinding process at any time
by pressing the start/stop button
Pressing the start/stop button
start a new grinding process.
■ 6 │ GB │ IE

Selecting the grind setting

You can use the different grinder settings to adjust
0 to
the grain size of the coffee powder.
As a rule of thumb, the finer the grind, the shorter
the contact time of the coffee powder with the
water will be. This is why espresso makers require
very finely ground powder, filter coffee machines
and hand filters a medium grind and cafetières a
rather coarse grind.
NOTE
► Please also note the information about
suitable powder fineness in the operating
manual of your coffee machine.
► The suggested grind settings are for guidance
only. The ideal grind setting depends, for
example, on the type of bean, the roast or
your personal preferences. You should
therefore try out the various options to find the
optimum grind setting for your purposes.
Turn the coffee bean container 2 until the
♦
▼ arrow on the coffee bean container 2 is
above the desired grind setting on the scale for
adjusting the grind setting 6. You can choose
from 25 grind settings:
–
1 - 6: Fine powder, suitable for espresso
preparation in the espresso pot or in a
standard portafilter espresso machine.
We recommend grinder setting 4.
–
6 - 16: Medium-fine powder, suitable for
preparing standard household filter coffee.
We recommend grinder setting 8.
–
0.
16 - 25: Medium-fine to coarse powder,
0 again will
suitable for making coffee in a cafetière.
We recommend grinder setting 20.
SKKM 200 A1