TMR31, TMR35
7
Accessories
An overview of the accessories for your device is available in the internet at:
www.products.endress.com/tmr31
www.products.endress.com/tmr35
Proceed as follows:
1.
Go to the Internet page.
2.
Click the "Accessories/Spare parts" tab.
3.
Select the required accessories.
8
Troubleshooting
8.1
Return
The following procedures must be carried out before a device is returned to Endress+Hauser:
• Always enclose a fully completed "Declaration of Contamination" form with the device. This
declaration form can be downloaded from the internet at
www.endress.com/decontamination_form.
• Remove all fluid residues. This is particularly important if the fluid is hazardous to health, e.g.
flammable, toxic, caustic, carcinogenic, etc.
#
Warning!
Do not return a measuring device if you are not absolutely certain that all traces of hazardous
substances have been removed, e.g. substances which have penetrated crevices or diffused
through plastic.
8.2
Disposal
The device contains electronic components and must, therefore, be disposed of as electronic
waste in the event of disposal. Please observe in particular the local waste disposal regulations
of your country.
Endress+Hauser
Accessories
25