Siemens SIPROTEC 4 7XT34 Produktinformation Seite 35

✧ Fasten the mounting brackets to the mounting brackets of the housing using M4
screws.
✧ Set M6 threaded holes, M6 bolts or corresponding dowel drills according to
Figure 7-1.
✧ Use adaptors to fasten the 7XT34 device with attached mounting brackets to
the switch panel using 6-mm screws.
✧ Push the adaptors on the bolts with the bolts inserted.
✧ Fasten the mounting brackets on the bolts using suitable nuts.
SIPROTEC 4, 20-Hz Band-pass Filter 7XT34, Product Information
C53000-B1174-C130-4, Edition 01.2013
13