Setting The Operating Language - Endress+Hauser RSG30 Ecograph T Kurzbedienungsanleitung

Multi Channel Recorder
Operating ele-
ment (Item No.)
3
4
5
6
5.4

Setting the operating language

The default setting for the operating language is English. A different operating language can be
configured in the Setup (see Operating Instructions).
Operating function
Window for measured value display
Displays the current measured values depending on the signal display selected.
!
.
Note!
If a measuring point has limit value status, the corresponding channel identifier is dis-
played in red (quick detection of limit values). When you are operating the device,
measured value acquisition continues to run without interruption.
Displays the current date/time or operating item in the Setup menu
Indicates what portion of the CF card is already written to (in %) or displays the oper-
ating code in the Setup menu.
Functions of the LED displays on the display (as per NAMUR NE44:)
• Green LED lights up: power supply OK, device working without faults
• Red LED flashes: need for maintenance if device-external problem occurs (e.g.
cable open circuit etc.) or a message / note to be acknowledged is pending, cali-
bration in progress.
Commissioning and operation
25