Connecting Connexxlink And Bluetooth Dongle - Siemens ConnexxLink Bedienungsanleitung

Connecting ConnexxLink and Bluetooth dongle

Turn ConnexxLink on by pressing the
 
on / off button.
When the Bluetooth symbol on the
screen stops blinking, the Bluetooth
dongle and ConnexxLink are connected.
ConnexxLink will go into stand-by mode after
60 minutes of inactivity.
Turn ConnexxLink back on by pressing the
 
on / off button.
Wireless streaming of the Tek connect remote
control blocks the programming signal of
ConnexxLink.
When programming hearing instruments
 
wirelessly do not use the audio streaming
function of the Tek connect remote control.
Start the Connexx detection dialog via the button
 
"Detect connected instruments" in the toolbar or on
the hearing instrument's task card.
Choose ConnexxLink as the detection device.
 
Follow the steps in Connexx to detect and program the
 
hearing instruments.
38