Silvercrest homematic HmIP-SWDM-B2 Bedienungsanleitung Und Sicherheitshinweise Seite 47


Remove the battery insulation tabs from the battery compartment
(F) of the window and door contact. The teach-in mode is active
for three minutes.
You can start the teach-in mode manually for a further three
minutes by briefly pressing the System button (C) (see
Figure 3).

The device automatically appears in the SilverCrest Smart Home
app.

To confirm, enter the last four digits of the device number
(SGTIN) into the app or scan the QR code. The device number
can be found on the label in the package contents or on the
device itself.

During the login, you must specify the application or use of the
device.

Wait until the teach-in process is complete.

To confirm successful completion of the teach-in process, the LED
(C) will turn green briefly and then go off again. The device is
now ready for use.
The LED will turn red if the teach-in process failed. Try it
again. Please take particular care to ensure that the last
four digits of the device number are entered correctly/the
QR code is scanned correctly.

Select the application (for example, indoor climate and/or
security) for which you wish to use the device.

In the app, give the device a name and assign it to a room.
HmIP-SWDM-B2
English - 45