Hazard Levels; Description Of The Appliance; Commissioning And Operation; Initial Start-Up - Kärcher AF 100 Originalbetriebsanleitung

Hazard levels

DANGER
Pointer to immediate danger, which leads to severe in-
juries or death.
WARNING
Pointer to a possibly dangerous situation, which can
lead to severe injuries or death.
CAUTION
Pointer to a possibly dangerous situation, which can
lead to minor injuries.
ATTENTION
Pointer to a possibly dangerous situation, which can
lead to property damage.

Description of the Appliance

When unpacking the product, make sure that no acces-
sories are missing and that none of the package con-
tents have been damaged. If you detect any transport
damages please contact your dealer.
Illustrations on fold-out page!
1 Filter cover, front
2 Pre-filter
3 Main filter
4 Filter cover, rear
5 Air outlet
6 Digital display
7 Operating field
8 Air quality display
9 Filter cover handle
10 Air quality sensor cover
11 Main Supply
12 On/off operation button
13 Manual mode operation button
14 Automatic mode operation button
15 Night mode operation button
16 Change filter indicator

Commissioning and operation

ATTENTION
Always operate the device with pre-filters and fine filters
installed.
Initial startup
Illustration
 Before initial start up, the fine filters already in-
stalled in the unit must be unpacked.
 Plug the mains connection into the device
 Insert the mains plug into a socket.
All operation buttons on the control panel and the
air quality display light up briefly and go out again.
 Press the on/off operation button in order to switch
the device on.
Note
– When the device is switched on, the integrated air
quality sensor automatically measures the air qual-
ity in the room.
– Set the desired mode by pressing the appropriate
operation button on the control panel.
10
Start up
Automatic mode
When automatic mode is activated, the device selects
the appropriate fan speed for the measured air quality.
 Press the on/off operation button in order to switch
the device on.
 Press the automatic mode operation button.
 The corresponding button lights up.
Note
– The integrated air quality sensor measures the air
quality and automatically selects the right speed level
to ensure the best possible air quality in the room.
– As soon the air is clean, the device switches to low
fan speed.
Manual mode
When manual mode is activated, you can manually set
the fan speed.
 Press the on/off operation button in order to switch
the device on.
 Press the manual mode operation button.
 The corresponding button lights up.
Note
– By pressing the button several times, the fan speed
can be set in three speeds.
Display
One fan blade
Two fan blades
Three fan blades
Night mode
Control panel and display elements are switched off
when night mode is activated.
The unit continues to operate and the fan speed switch-
es to the lowest level.
The unit's lighting is re-activated by touching the control
panel.
 Press the on/off operation button in order to switch
the device on.
 Press the night mode operation button.
 The corresponding button lights up.
 Control panel and display elements switch off with
a time delay.
Air quality display
 Press the on/off operation button in order to switch
the device on.
Air quality display is lit:
Blue: Very good air quality (PM2.5 under 60 µg/m
Yellow: Mediocre air quality (Pm2.5 between 60 and
160 µg/m )
3
Red: Bad air quality (PM2.5 over 160 µg/m
Digital display
– Displays the current value of the fine dust content
(PM2.5).
– Displays the remaining run time of the filter as a
percentage.
Filter lifespan
Note
– The filter lifespan depends on daily usage pattern
and the air quality.
– Regardless of the indicator, an annual filter change
is recommended for reasons of hygiene.
– 6
EN
Operating field
Fan speed
low
medium
high
)
3
)
3