Westfalia 92 86 37 Originalanleitung Seite 10

Intended Use

The device is designed to check the air pressure
and to fill or deflate tyres, such as car, motorcy-
cle, truck, or bicycle tyres.
 The intended use also includes an operation
following the operating instructions.
 Any use beyond these parameters (different
media, applying force) or any changes (recon-
struction, no original accessory) can lead to serious risks and is re-
garded as use that is contrary to the intended purpose.
Before first Use
Unpack the device and check all parts for any damage in transit. Dispose
of packaging materials or store them out of reach of children. There is risk
of suffocation!
Notes

The optimum air pressure of the car tyre not only provides safe
performance and durability of your tyres – using the right tyre pres-
sure, recommended by the automobile manufacturer, also can safe
fuel.

You will find the details on the comfortable minimum pressure for your
tyres in the instruction manual of your vehicle or e.g. at the door pillar
or behind the petrol cap.

The compressed air, to refill the tyre, has to be oil free. Do not connect
an oiler ahead of the unit. It is recommended to use a separate com-
pressed air hose only for working with the device, because there may
be oil residues on other compressed air hoses.
Measuring
1. Put the valve connector (1e) on the tyre valve. To do this, please press
down the lever to unlock the clamping mechanism. As soon as you
release the lever, the plug clamps at the valve.
2. Read the existing pressure from the manometer (1a).
Outer rim of the scale = the unit in bar (1 bar = 100 kPa)
Inner rim of the scale = the unit in psi.
Operation the Air Tester
10