Start-Up Of Bea 060 In Stand-Alone Mode; Installing Systemsoft Bea-Pc Uk; Installing Database Petrol Uk; Bea 060 Configuration - Bosch Emissions-Analyse BEA 060 Originalbetriebsanleitung

en | 24 | BEA 060 |
4.3 Start-up of BEA 060 in stand-alone
mode
The following description of installation of SystemSoft
BEA-PC UK and the Database Petrol UK, as well as
BEA 060 configuration, only apply to BEA 060 stand-
alone mode.
4.3.1

Installing SystemSoft BEA-PC UK

i
Heed the system prerequisites before starting
installation.
i
Only plug in the Bluetooth USB adapter when
prompted to do so during software installation.
1. Close all open applications.
2. Insert the "SystemSoft BEA-PC" DVD in the
DVD drive.
3. Start "Windows Explorer".
4. Start 'D:\RBSETUP.EXE' (D = DVD drive letter).
 Set-up is started.
5. Confirm with <Continue>.
6. Heed and follow the instructions on the screen.
7. Re-start the PC/Laptop to successfully conclude
installation.
"
BEA is installed.
4.3.2

Installing Database Petrol UK

1. Close all open applications.
2. Insert the "Database Petrol UK" DVD in the DVD
drive.
3. Start "Windows Explorer".
4. Start 'D:\RBSETUP.EXE' (D = DVD drive letter).
 Set-up is started.
5. Select the set-up language and confirm with <OK>.
6. Heed and follow the instructions on the screen.
"
Database Petrol UK are installed.
|
1 689 989 112 2020-06-24
4.3.3

BEA 060 configuration

After installing the BEA software, the device interface
of the BEA 060 has to be set. The BEA 060 can be
connected by way of either the USB connecting cable
or Bluetooth to a PC/Laptop.
1. Select "Start >> All programs >> Bosch >>
Diagnostics >> Central Device Communication" or
click onto " " in the task bar with the left mouse
key.
 CDC – Central Device Communication is opened.
2. Select "Settings >> Device interfaces".
i
Pressing <F1> opens the Online Help for a display
of the most important information on interface
setting.
3. Configure the BEA 060 in the GAM Group (USB or
Bluetooth).
 BEA 060 is ready for operation.
4. Start SystemSoft BEA-PC.
4.4

Program description

i
Refer to the Online Help for further details on the
BEA-PC system software.
Robert Bosch GmbH