About This Document; General Safety Instructions - Bosch Rexroth ILKE350 Bedienungsanleitung

3 609 929 B62/2009-02 | KE350/KE350G IL
1

About this document

This manual contains important information
on the safe and appropriate assembly,
transport, commissioning, operation,
maintenance, disassembly and simple
troubleshooting of the KE350 or KE350G IL
communication unit.
Read these instructions completely,
especially chapter "2 General safety
instructions" on page 23, before working
with the KE350/KE350G IL communication
unit.
Related documents
The KE350 or KE350G IL communication
unit is a system component.
Also observe the instructions for the other
system components.
Also observe the generally applicable, legal
or otherwise binding regulations of European
or national legislation and the rules for the
prevention of accidents and for
environmental protection applicable in your
country.
2 General safety
instructions
The KE350/KE350G IL communication unit
has been manufactured according to the
accepted rules of current technology. There
is, however, still a danger of personal injury or
damage to equipment if the following general
safety instructions and the warnings before
the steps contained in these instructions are
not complied with.
• Read these instructions completely before
working with the KE350/KE350G IL
communication unit.
• Keep these instructions in a location where
they are accessible to all users at all times.
Bosch Rexroth AG
• Always include the operating instructions
when you pass the KE350/KE350G IL
communication unit on to third parties.
Intended use
The KE350/KE350G IL communication unit
is a component in terms of the machine
directive 98 / 37 /EC and is not a ready-for-
use machine. The product is exclusively
intended for being integrated in a machine or
system or for being assembled with other
components to form a machine or system.
The product may be commissioned only if it is
integrated in the machine/system for which it
is designed and the machine/system fully
complies with the EC machine directive.
Observe the operating conditions and
performance limits specified in the technical
data.
The KE350/KE350G IL communication unit
is a work appliance and not designed for
private use.
Intended use includes having read and
understood these instructions, especially the
chapter "2 General safety instructions".
The KE350/KE350G IL communication unit
is intended for installation in the BT356 card
rack or SB35x system box.
Improper use
Any use of the KE350/KE350G IL
communication unit other than described in
chapter "Intended use" is considered as
improper.
Personnel qualifications
Assembly, commissioning and operation,
disassembly, service (including maintenance
and repair) require basic electrical and
mechanical knowledge, as well as
knowledge of the appropriate technical
terms. In order to ensure operating safety,
these activities may therefore only be carried
23/120