Installing The Main Or Additional Monitor - Philips WelcomeEye Connect Pro Bedienungsanleitung

badge's function. Badge colours simply enable users to recognize their functions. If a badge
is lost, it can be replaced by any other badge by repeating the programming step.

3. Installing the main or additional monitor

1
4
7
1 - Position the wall bracket so that the screen of the monitor is approximately 1.60m above
the ground.
2 – Mark the location of the holes using the U bolt.
3 – Drill.
4 – Use pegs adapted to the bracket (those supplied are suitable for solid walls).
5 - Attach the wall bracket.
6 - Connect the two intercom panel wires and the two power supply wires in accordance
with the wiring diagram.
7 - Position the monitor on the wall bracket.
8 - Depending on the confi guration selected, and when wiring is completed, the interface
may have to be confi gured.
Warning: during this step, do not connect the power supply to the 230V AC.
GB7
1m60
2
5
WelcomeEye Connect Pro / V2
3
DES 9900 VDP
5 3 1 0 2 2
Wi 2.4GHz
24V 550mA
-
+ 1/3 2/4
SMARTHOME FRANCE
19 avenue Marcel Dassault 37200 TOURS
FRANCE
5 3 1 0 2 2
6