Service; General Inspection; Lubrication; Battery Disposal - Westfalia AH18 Originalanleitung

Service

WARNING: Always disconnect from the mains power supply,
before carrying out any maintenance/ cleaning of the charger.
Remove the
ance / cleaning of the tool.
Note: Both the tool and the charger contain no user-serviceable
parts except for the grinding stone. If the device does not perform
as outlined in this manual, turn to the Westfalia customer service
or to a competent professional.

General Inspection

 Regularly check that all the fixing screws are tight.
 Inspect the supply cord of the charger for damage or wear
prior to each use. Repairs should be carried out by an author-
ised service centre. This advice also applies to extension
cords used with this tool.

Lubrication

 Slightly lubricate all moving parts at regular intervals with a
suitable spray lubricant.
 For plastics do not use oil, use a silicone lubricant instead.

Battery Disposal

Run motor until the battery is completely discharged.
1.
Remove the battery from the tool.
2.
Wrap heavy insulating tape around the battery terminals or
3.
enclose in a sealable plastic bag to prevent possible shorting.
Dispose of the battery through your local waste removal
4.
authority. Defective Lithium ion batteries may not be shipped.

Maintenance and Cleaning

 Remove the battery before undertaking any cleaning or
maintenance work.
Operation
battery before carrying out
31
any mainten-