Westfalia AH18 Originalanleitung Seite 24

 Attention: When working with some materials, hazardous dust
and wood chips will be formed. Take protective measures.
 Do not grasp into the planning debris opening (3). Avoid
contact with rotating parts as well as with the planing blades.
 Always switch on the machine before placing it against the
workpiece. Otherwise the machine could kick back.
 Make sure the planning sole lays flat against the workpiece, so
the machine cannot get snagged.
 Only operate the machine with all planing blades mounted.
 Do not operate the machine without the belt cover.
 If pieces of wood or foreign objects become jammed in the
machine, turn off the electric planer and wait until the blade
shaft (17) has come to standstill. Then remove the battery and
remove the wooden object.
 Always switch off the machine and remove the battery when
taking a break, when not in use or during maintenance.
 Do not operate the machine with blunt or damaged blades.
Blunt or damaged blades may kick back and should be re-
placed immediately.
 Only use original replacement parts.
 Always keep the machine clean, dry and free from oil or dirt.
 Periodically check all nuts, bolts and other fixings and tighten
where necessary.
 Do not operate the machine if it does not work properly or is
damaged. Do not disassemble it and do not try to repair it
yourself. In the case of problems contact the customer support
department.
Additional Battery and Charger Safety Notes
WARNING: Li-Ion batteries, if incorrectly used, stored or charged
are a fire, burn and explosion hazard.
Use the battery charger correctly
 Refer to the section of this manual relating to use of the battery
charger before attempting to charge the battery.
Safety Notes
20