Maintenance And Cleaning - Westfalia RWL 1000 IA Bedienungsanleitung

Maintenance

Always check the condition of the lathe first each time before using. Check
the safety devices, switches and mains cable. Check for loose bolts and
screws, poor alignment, contacting moving parts, broken parts and any
other factors that could affect safe operation.

Switch the machine off immediately if there are any unusual sounds or
vibrations. Do not continue to use the machine if there are any signs of
damage. In this case, have it repaired by a qualified technician or contact
the Westfalia Service Department.

Keep your cutting tools sharp and clean for safe and trouble-free operation.

Adhere to lubrication and tool-changing instructions.
 Check the machine's connecting lead regularly and have any damage
repaired by a qualified technician.

Check any extension leads regularly and replace them if they are
damaged.

Keep handles dry and free of oil and grease.
Cleaning

Keep the appliance clean, dry and free of oil and grease.

Pay attention that the ventilation slots in the motor housing are always free
of blockages and foreign bodies. Failure to do so could result in the motor
overheating and being damaged.

Use compressed air or a hand brush to remove wood shavings, sawdust
etc. Never immerse the machine in fluids. Only use a soft, damp cloth to
clean the machine.

Never use easily inflammable or combustible detergents in the vicinity of
electrical tools and machinery.

Maintenance and Cleaning

18