Siemens SIPART PS2 Bedienungsanleitung Seite 30

4.2.8.5 M12 connector for connecting the outputs of the position feedback module 6DR4004-6J /
8J (-Z D53)
You have a positioner with order suffix -Z order code D53. In this version of the positioner, an M12 connector is used to
electrically connect the current output of the position feedback module.
Table 4-5 Assignment diagram
Current output terminal
61 (+)
Shield support of housing
62 (-)
4.2.8.6 M12 connector for connecting the external position detection system (-Z D54)
You have a positioner with order suffix -Z order code D54. In this version of the positioner the M12 connector connects the
external position detection system with the built-in EMC filter module (C73451-A430-D23).
Table 4-6 Assignment diagram
Terminal
POT (X1/2)
VCC (X1/4)
GND (X1/1)
VREF (X1/3)
4.2.8.7 M12 connector for connecting the outputs of the SIA module 6DR4004-6G /-8G (-Z D56)
You have a positioner with order suffix -Z order code D56. In this version of the positioner, an M12 connector is used to
electrically connect the outputs of the SIA module.
Table 4-7 Assignment diagram
Alarm output terminal
41 (+)
52 (-)
42 (-)
51 (+)
28
Pole designation
1 - Brown
4 - Black
3 - Blue
Pole designation
3 - Blue
1 - Brown
4 - Black
2 - White
Pole designation
1 - Brown
4 - Black
3 - Blue
2 - White
SIPART PS2 (6DR5...)
A5E03436620-07, 10/2015