6. Connect the cables of each switch to the lug of the printed circuit board in pairs. Use the provided cable ties
purpose.
①
Screw
②
Cover
③
Cable tie
Figure 4-13
Connecting the cables
4.2.8
Option device version M12 connector
This section describes which terminal of the devices and option modules listed below is connected with the respective pole
of the M12 connector.
Note
Technical specifications
Observe the specifications for the electrical data in the certificate and/or in section "Technical data (Page 43)".
View of the mating side pole pattern
26
Pole designation
1
4
3
2
③
for this
Wire color of M12
connector
Brown
Black
Blue
White
SIPART PS2 (6DR5...)
A5E03436620-07, 10/2015