Siemens SIPART PS2 Bedienungsanleitung Seite 29

4.2.8.1 M12 connector in basic device SIPART PS2 with and without HART
You have a positioner 6DR50..-0.R.. or 6DR50..-0.S.. In this version of the positioner the current input I
basic electronics is connected via an M12 connector.
Table 4-1 Assignment diagram
Current input terminal
6 (+)
Shield support of housing
7 and 8 (-)
4.2.8.2 M12 connector in basic device SIPART PS2 with PROFIBUS PA
You have a positioner 6DR55..-0.R.. or 6DR55..-0.S. In this case the M12 connector is connected to the bus circuit of the
basic electronics.
Table 4-2 Assignment diagram
Bus circuit terminal
7
Shield support of housing
6
4.2.8.3 M12 connector in basic device SIPART PS2 with FOUNDATION Fieldbus
You have a positioner 6DR56..-0.R.. or 6DR56..-0.S.. In this case the M12 connector is connected to the bus circuit of the
basic electronics.
Table 4-3 Assignment diagram
Bus circuit terminal
7
Shield support of housing
6
4.2.8.4 M12 connector for connection of the outputs of the alarm module 6DR4004-6A / -8A (-Z
D55)
You have a positioner with order suffix -Z order code D55. This version of the positioner is connected via an M12 connector
to the current output of the position feedback module.
Table 4-4 Assignment diagram
Alarm output terminal
41 (+)
52 (-)
42 (-)
51 (+)
SIPART PS2 (6DR5...)
A5E03436620-07, 10/2015
4 to 20 mA of the
W
Pole designation
1 - Brown
4 - Black
3 - Blue
Pole designation
1 - Brown
4 - Black
3 - Blue
Pole designation
1 - Brown
4 - Black
3 - Blue
Pole designation
1 - Brown
4 - Black
3 - Blue
2 - White
27