Controls And Functions; Receiver (R-1330) - Yamaha MCS-1330 Bedienungsanleitung

Receiver (R-1330)

■ Front panel
1 2
ON/STANDBY
PHONES
OFF
8
1 ON/STANDBY, OFF
Turns the receiver to ON/STANDBY or OFF.
2 ON/STANDBY indicator
Lights up in green when the receiver is turned on. Lights
up in amber when the receiver is in standby mode.
The indicator goes off when the receiver is turned off.
3 Front panel display
Shows the various information such as the tuning
frequency.
4 PRESET indicator
Lights up when you select preset radio stations (see
page 18).
5 TUNED indicator
Lights up when the receiver is tuned into a station.
6 STEREO indicator
Lights up when the receiver is receiving a strong signal
from an FM stereo broadcast.
7 SLEEP indicator
Lights up when the sleep timer is on (see page 13).

CONTROLS AND FUNCTIONS

iPod
D
3 5
4
PRESET
9
E
6 7
TUNED STEREO kHz SLEEP MHz
INPUT PURE TUNER PRESET
DIRECT
0 A
B
8 PHONES
Outputs audio signals for private listening with headphones.
9 Remote control sensor
Receives signals from the remote control.
0 INPUT
Selects an input source.
A PURE DIRECT
Turns on or off the Pure Direct mode (see page 12).
When PURE DIRECT mode is on, the indicator above
lights up.
B TUNER PRESET
The input source is changed to FM. Selects a preset station.
Operable even when the receiver is in standby mode.
C VOLUME
Adjusts the volume level.
D h / e
The input source is changed to iPod. Starts and pauses the
playback of iPod. Operable even when the receiver is in
standby mode.
E iPod terminal
Connect your iPod (see page 11).
Top view
VOLUME
MIN MAX
C
Front view
/
3
En