Inhaltsverzeichnis
Werbung
Operation
Before first Use
Unpack the hair dryer. Keep packaging material out of reach of
children. There is risk of suffocation!
Voltage Selector Switch (G) 120V resp. 230V
Confirm your local mains voltage and adjust the voltage selector
switch with a small screwdriver or a suitable coin. If you do not
observe this, the hair dryer may be damaged!
Switching On and Off (D)
To switch on the hair dryer, slide the switch in direction 1 for
warm air stream. If you slide the switch in direction 2 you will
achieve hot air stream. To switch off the unit, slide the switch
completely down.
Air Nozzle (A)
With the air nozzle you can focus the air stream on a smaller
area. To attach the nozzle press it as far as it will go on the air
outlet opening. You can turn the nozzle to the desired position.
To remove the nozzle, pull it out of the housing.
Overheat Protection
If the hair dryer overheats, the overheat protection will shut down
the unit. In this case set the switch to Off and pull out the power
plug. Use the dryer as usual after is has cooled down sufficiently.
Safety Grille (B)
The safety grille in front of the air inlet opening prevents hair from
being sucked into the air inlet. If the grille becomes clogged,
clean it with a vacuum cleaner or a brush. Otherwise the hair
dryer will always overheat.
7
Werbung
Inhaltsverzeichnis
