Cassette Deck - Grundig RR 630 CD Handbuch

Compact cassettes
– Copyright: Recording is permissible insofar
copyright or other rights of third parties are
not infringed.
• For recording, use a NORMAL (IEC type I)
GB
cassette on which the tabs are not broken out.
– This deck is not suited for recording on
CHROME (IEC II) or METAL (IEC IV) cassettes.
• For playback, any cassette type may be in-
serted.
– At the very beginning and end of the tape,
no recording will take place during the
7 seconds when the leader tape passes the
recorder heads.
• To prevent the acciden-
tal erasure of a record-
ing, keep the cassette
side to be safeguarded
in front of you and
break out the left tab.
Now, recording on this
side is no longer possible.
• To render this safeguard ineffective, cover the
hole with a piece of adhesive tape.
• Do not expose the cassettes to rain, moisture,
sand, or to excessive heat. (E.g. from heating
equipment or in motor cars parked in the sun).
• Do not store cassettes near strong magnetic
fields (for example, TV sets, speakers,
engines, etc.).
18

CASSETTE DECK

Cassette playback
• Set the FUNCTION switch to TAPE/OFF.
• Press 9// to open the cassette holder.
• Insert a recorded cassette.
with the open side
downward and the full
spool on the left.
• Adjust the sound using the
VOLUME and UBS
controls.
• You may connect stereo headphones having
a 3.5 mm plug to the jack
– Inserting the plug will disconnect the
speakers.
• Press B and playback will start.
– Playback stops when the tape in the deck
reaches the end.
1
• For brief interruptions, press
– To restart playback, press this button once
more.
• To stop, press 9//.
– When the end of the tape is reached the B
button is released.
– The set will be switched off if the FUNCTION
switch is in position TAPE/OFF and no
buttons are pressed.
– The ON indicator
Winding the tape
• Press R to search forward to the end of
the tape.
• Press Q to search backward to the
beginning of the tape.
• To stop, press 9//.
Cassette recording
• Press 9// to open the cassette holder.
• Insert the cassette.
• When monitoring during record-
ing, adjust the sound using the
controls VOLUME and UBS.
These controls do not affect the
recording.
• Start recording by pressing 0.
(the B button is automatically also pressed).
– When the end of the tape is reached, the recorder
buttons are released.
.
p
• To interrupt recording, press
• To continue recording, press
• Press 9// if you want to stop recording before the
end of the tape.
On pressing again, the cassette holder will open.
• The set is switched off if the FUNCTION switch is
;
.
in position TAPE/OFF and no buttons are pressed.
– The ON indicator
Recording from the CD-player (CD synchro recording)
• Set the FUNCTION switch to CD.
• It's not necessary to start the CD player separately:
by pressing 0 the CD player starts automatically.
– If the CD player is in STOP position, recording will
start from the beginning of the CD (or from the
beginning of the programmed selection).
6 goes out.
• To start a recording in the middle of a track, play
the CD in the normal way.
• As soon as the desired passage is reached, pause
the CD and then start recording by pressing 0.
Recording from the radio
• Set the FUNCTION selector to RADIO.
• Select the wave band using the BAND switch.
• Tune to desired radio station using the TUNING
control knob.
• Start recording by pressing 0.
;
.
;
again.
goes out.
6