Silvercrest SDRF 10 B1 Bedienungs- Und Sicherheitshinweise Seite 68

Hold down the
mode. The colour LCD
well as the alarm settings for alarm 1
Set the main switch
"Off" position to switch the product off completely.
Note: When the power supply
uses a small amount of electricity, even if the product is not connected
to the power supply
Switching on / off when battery powered:
Fully extend the antenna
Set the main switch
position.
Then press the
the product for the first time it will automatically scan for DAB+ sta-
tions after being switched on. After the DAB+ station scan has com-
pleted, the product will select the first available DAB+ station and
start playing it. By default, the DAB+ stations are listed in numeri-
cal and alphabetic order.
Press the
Set the main switch
position to switch the product off completely.
Note: The station list is automatically saved so the product does
not need to scan for DAB+ stations the next time it is switched on.
After being switched on, the product will automatically start play-
ing the last DAB+ station selected.
Note: You can manually scan for DAB+ stations at any time or
start an automatic station scan as described in chapter "DAB+
station scan".
68 GB/IE
button and the product switches to standby
8
shows the current date and time
1
on the right side of the product to the
3
15
or is switched off.
15
for good reception.
7
on the right side of the product to the "On"
3
button to switch the product on. When using
8
button to switch the product off.
8
on the right side of the product to the "Off"
3
and alarm 2
1g
is plugged into a mains socket it
, as
1b
.
1f