Ec Declaration Of Conformity - Husqvarna CA230 Bedienungsanweisung

EC Declaration of Conformity - for
gasoline operated products
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel:
+46-36-146500, declares that the cultivator, Husqvarna,
attachment with serial numbers dating from 2019 and
onwards (the year is clearly stated on the rating plate,
followed by the serial number), comply with the
requirements of the COUNCIL'S DIRECTIVE:
• of May 17, 2006 "relating to machinery" 2006/42/EC
• of June 8, 2011 "restriction of use of certain
hazardous substances in electrical and electronic
equipment" 2011/65/EU
• of May 8, 2000 "relating to the noise emissions in the
environment" 2000/14/EC.
The following standards have been applied for Gasoline
products:
ISO 11449:1994, EN 50581:2012
Notified body, has carried out EC type examination in
accordance with the machinery directive's (2006/42/EC)
article 12, point 3b. The certificate for EC type
examination in accordance with annex IV, have the
number: SEC/14/2415 - Husqvarna CA230
Huskvarna, 2019-06-24
Per Gustafsson, Development Manager (Authorized
representative for Husqvarna AB and responsible for
technical documentation)
EC Declaration of Conformity - for
battery operated products
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel:
+46-36-146500, declares that the cultivator, Husqvarna
CA230 together with power unit Husqvarna 325iLK with
serial numbers dating from 2019 and onwards (the year
is clearly stated on the rating plate, followed by the serial
number), comply with the requirements of the
COUNCIL'S DIRECTIVE:
• of May 17, 2006 "relating to machinery" 2006/42/EC
• of June 8, 2011 "restriction of use of certain
hazardous substances in electrical and electronic
equipment" 2011/65/EU
• of May 8, 2000 "relating to the noise emissions in the
environment" 2000/14/EC.
10

EC Declaration of Conformity

The following standards have been applied for Battery
products:
EN 62841-1:2015, ISO 11449:1994, EN 50581:2012
RISE SMP Svensk maskinprovning AB, Box 7035,
SE-750 07 Uppsala, Sweden has performed voluntary
type examination on behalf of Husqvarna AB. The
certificate is numbered: SEC/14/2415 - Husqvarna
CA230
Notified body 0404, RISE SMP Svensk Maskinprovning
AB, Box 7035, SE-7035, SE-7507, Uppsala, Sweden
has made conformity assessment according to Annex VI
of Directive 2000/14/EC and issued a certificate with the
number: 01/040/001
For information relating to noise emissions, refer to
Technical data on page 8 .
Huskvarna, 2019-06-24
Per Gustafsson, Development Manager (Authorized
representative for Husqvarna AB and responsible for
technical documentation)
742 - 002 - 13.12.2019