Sony DSBK-120 Bedienungsanleitung Seite 17

3
[DSR-85/85P]
Plug the connector of the SDI-
27 board firmly into the
connector on the DDE-4 board.
[DSR-80/80P]
Plug the connector of the SDI-
28 board firmly into the
connector on the DV-15 board.
4
[DSR-85/85P]
With two of the screws
supplied with the DSBK-120/
120P, fasten the SDI-27 board
to the DDE-4 board.
[DSR-80/80P]
With two of the screws
supplied with the DSBK-120/
120P, fasten the SDI-28 board
to the DV-15 board.
5
[DSR-85/85P]
Pass the two cables (connected
to the SDI-27 board in the
"Preparations" stage) over the
DDE-4 board along the
illustrated route.
[DSR-80/80P]
Execute the following steps.
1) Pass the two cables
(connected to the SDI-28
board in the "Preparations"
stage) over the DV-15
board along the illustrated
route.
SDI-27 board [DSR-85/85P]
SDI-28 board [DSR-80/80P]
(A)
DDE-4 board [DSR-85/85P]
DV-15 board [DSR-80/80P]
SDI-27 board [DSR-85/85P]
SDI-28 board [DSR-80/80P]
SDI-27 board
SDI-28 board
Push the connector
completely in, so that there is
no gap between the two
connectors as seen along the
direction of arrow (A).
This way
Not this
way
Metal cover
Looking into holes in
the metal cover, select
the screw holes
surrounded by white
hatching.
DDE-4 board
DV-15 board
(Continued)
17